Electro Sales Update January 12, 2009

Product Release


We are proud to announce the release of three new products today, two new plenum heaters to complete our WarmFlo Select product line and our new Industrial Boiler.

The intent of the email is to give you a quick snapshot of the products being released, as well as links to brochures, specification sheets, price sheets, and Webinar date.

As part of the introduction, we will be holding a Webinar specifically for you. The focus of this Webinar is to provide you with detailed information regarding these products. The Webinar will be held on January 16, 2009 at 10:30am CST, and will run for approximately 40 minutes.

Attending this Webinar is the key in getting a solid understanding of these new products. This Webinar is also an excellent opportunity for you to ask any questions that you may have about these new products.

WarmFlo Select photoWarmFlo Select SL2 Series

The WarmFlo Select SL2 Series is based upon the same concept as the SL1 plenum heaters. The plenum heater incorporates all-inclusive controls, doing away with the need for an external interface module.

The SL2 is specifically designed to be used in conjunction with 2-stage heat pump systems and is compatible with single or multi-stage gas or oil furnaces, with or without variable speed blowers. The SL2 includes dual fuel control, with manual override switch. The SL2 uses a conventional 4-wire thermostat and can be configured to be used in 1HEAT/1COOL or 2HEAT/2COOL mode. The SL2 unit will not work with a heat pump thermostat and does not apply to 1 or 2-stage air conditioning. For 1 or 2-stage air conditioning, use WarmFlo Select SL1 Series.

WarmFlo Select SL2 Supporting Documents

  • Literature - EL703
  • Technical Specifications - EL002
  • Installation Manual - EI710
  • Price Sheet - EL704

WarmFlo Select photoWarmFlo Select SLC Series

The WarmFlo Select SLC Series is similar to the SL2 in the fact that all of the controls are built-in to the plenum heater with no external controls needed.

The SLC is specifically designed to be used in conjunction with Bryant Evolution™ or Carrier
Infinity™ heat pump communicating thermostat systems and allows for easy interface to either the Evolution or the Infinity systems. The SLC does not apply to Evolution or Infinity air conditioning systems, use WarmFlo Select SL1 Series. Note: The 286A or 288A outdoor unit and the “-B” thermostat control must be used in this application.

WarmFlo Select SLC Supporting Documents

  • Literature - EL703
  • Technical Specifications - EL002
  • Installation Manual - EI711
  • Price Sheet - EL704

Industrial Boiler photoElectro Industries' Industrial Boiler

During the early design stages of our new Industrial Boiler, we narrowed down the core design of this boiler to meet two goals. First, produce a high quality boiler that is fitted with many standard features typically reserved as options with most other manufacturers' boilers. Second, design the boiler in such a way that it is easy to use and could fit into tight existing spaces, which is typical with retrofits.

Available in 60 kW through 300 kW, the new Industrial Boiler is a seamless and excellent addition to our existing boiler line.

As part of the initial marketing release, Electro is offering a $500 rebate check per Industrial Boiler to the purchasing contractor through March 31, 2009.

Electro Industries' Industrial Boiler Supporting Documents

  • Specification Sheet - BL801
  • Installation Manuals - BI801 & BI802
  • Price Sheet - BL802

Thank you for taking the time to familiarize yourself with these new products. We are excited about the opportunities we have with these new products, and look forward to hearing from you at the upcoming Webinar presentations. In the meantime, if you have any questions regarding these products or any of our other products, please give us a call.

~ Electro Industries Sales Team ~


To attend this Webinar use the following procedure (preregistration is not required). Note: Internet connection speed must be 128 Kbps or higher.

1. Go to http://www.webdialogs.com/join
2. Complete the sign-in form (Conference ID 12431) and click Log In
3. For voice conferencing call 1-888-676-3315

Feel free to contact us with any questions or comments:
thaley@electromn.com
763.295.4138/800.922.4138