Duct Heaters

Radiant Heat
Radiant Electric Boilers
NorAire A2W HP System
Electro-Mates
Heat Pump Control
Buffer Tank Controller
WarmFlo
WarmFlo Air Handler
New Construction
Heat Pump Comfort Systems
Duct Heaters
Make-Up Air Heaters
HRV/ERV Heat Exchanger
Thermostats
Load Control Products
WarmFlo Analyzer

Duct Heaters

  • Electro Industries manufacturers a complete line of electric duct heaters with various physical sizes and KW/Btu/h outputs. 
  • Models from 1KW 6” round to 20KW Single and 3-phase units
  • WarmFlo temperature sensor option, if no heat is needed-element is off or modulated.
 

Typical Applications

  • Boost air temperature for any forced air system
  • Additional heat for cold room
  • Temper air temperature for Air to Air Heat Exchanger
  • Air Source Heat Pump-rids you of cold air syndrome
  • Ground Source Heat Pump boost / backup
 

 

Temperature Sensing Duct Heaters

  • Completely programmable duct sensing electric duct heater.
  • Automatically senses air temperature within ductwork
  • Regulates electric heat output based on predetermined desired temperature.
  • Flexible temperature ranges from 40 – 100 degrees

 

Heat Boost Models Available

Model # kW/Btu/h output Voltage Element size CFM
EM-WX0111R 1 kW/
3414 Btu/h
120V
plug
6” Round Element 150
EM-WX0212R 2.5 kW/
8533 Btu/h
240V 8” Round Element 250
EM-WX0515R 5 kW/
17065 Btu/h
240V 8” Round Element 350
EM-WX1025R 10 kW/
34130 Btu/h
240V 10” Round Element 700
EM-WC0515H 4.8 kW/
16387 Btu/h
240V 8”w x 10” d 400
EM-WC0515L 4.8 kW/
16387 Btu/h
240V 8”w x 16” d 400
EM-WC1025H 9.6 kW/
32775 Btu/h
240V 8”w x 10” d 800
EM-WC1025L 9.6 kW/
32775 Btu/h
240V 8”w x 16” d 800

 

Heat Pump Models Available

Model # kW/Btu/h output` Voltage Element size Fuse/ Breakers CFM
EM-WE1025H 9.6 kW/
32775 Btu/h
240 8”w x 10” d Fuses 700
EM-WE1025L 9.6 kW/
32775 Btu/h
240 8”w x 16” d Fuses 700
EM-WE1025C 9.6 kW/
32775 Btu/h
240 16”w x 16” d Plenum Fuses 700
EM-WE1535H 14.4 kW/
49147 Btu/h
240 8”w x 10” d Fuses 1000
EM-WE1535L 14.4 kW/
49147 Btu/h
240 8”w x 16” d Fuses 1000
EM-WE1535C 14.4 kW/
49147 Btu/h
240 16”w x 16” d Plenum Fuses 1000
EM-WE2035H 19.2 kW/
65549 Btu/h
240 8”w x 10” d Fuses 1200
EM-WE2035L 19.2 kW/
65549 Btu/h
240 8”w x 16” d Fuses 1200
EM-WE2035C 19.2 kW/
65549 Btu/h
240 16”w x 16” d Plenum Fuses 1200

 

Standard Duct Heaters Avaliable

Electro’s Standard Duct Heaters – Without the Warmflo temperature sensing control.  At a lower cost they provide the extra electric heat need for many applications.  They are reliable, safe, and offer many sizes and Btu/h ranges necessary for your application.

Model # kW/Btu/h output Voltage Element size CFM
EM-DI1025H 9.6 kW/
32775 Btu/h
240 8”w x 10” d 700
EM-DI1025L 9.6 kW/
32775 Btu/h
240 8”w x 16” d 700
EM-DI1025C 9.6 kW/
32775 Btu/h
240 16”w x 16” d Plenum 700
EM-DI1535H 14.4 kW/
49162 Btu/h
240 8”w x 10” d 1000
EM-DI1535L 14.4 kW/
49162 Btu/h
240 8”w x 16” d 1000
EM-DI1535C 14.4 kW/
49162 Btu/h
240 16”w x 16” d Plenum 1000
EM-DI2035H 19.2 kW/
65549 Btu/h
240 8”w x 10” d 1200
EM-DI2035L 19.2 kW/
65549 Btu/h
240 8”w x 16” d 1200
EM-DI2035C 19.2 kW/
65549 Btu/h
240 16”w x 16” d Plenum 1200

 

     


Electro Industries, Inc., 2150 West River Street, PO Box 538, Monticello, MN 55362 (Map)
Phone: 800.922.4138 or 763.295.4138  Fax: 763.295.4434

Copyright © 2014 Electro Industries, Inc. unless otherwise noted. All rights reserved.