Electro-Mate® Downflow & Horizontal

Previous
Electro-Mate Upflow
Electro-Mate Downflow & Horizontal
Electro-Mate EZ-Mate
Electro-Mate HeatChoice II
Fuel Cost Comparison

The downflow and horizontal applications have become more popular over the past few years.  As you can see from the diagram, the term downflow means the air travels in a direction from the top down coming out of the existing furnace.  The horizontal diagram shows the air flow going from side to side.  The diagrams below illustrates the typical installation and the optional dimensions required by the Electro-Mate.

Downflow Diagram

(Heat pump only)

Figure EI708-03

Horizontal Diagram

ART-150

Plenum and airflow requirements for an Electro-Mate to be installed in your system are:

  • Minimum width is 15”
  • Minimum depth is 18”
  • Minimum height for no Air Conditioning is 10"
  • Minimum height for Air Conditioning is a-coil plus 5” assuming the A/C line sets come out at the bottom

In a downflow system it is recommended to have the Electro-Mate above the coil.

Electro-Mate® (DFC) Models

Downflow 18” Downflow 15” kW Staging Btu/h
EM-LD20218 EM-LD20215 20 2 x 10 kW 68,000
EM-LD15278 EM-LD15275 15 2 x 7.5 kW 51,000
EM-LD10118 EM-LD10115 10 1 x 10 kW 34,000

Electro-Mate® WarmFlo® Models

Downflow 18” Downflow 15” kW Stages Btu/h
EM-WD25458 N/A 25 4 85,000
EM-WD20458 EM-WD20455 20 4 68,000
EM-WD15358 EM-WD15355 15 3 51,000
EM-WD102H8 EM-WD102H5 10 2 34,000
EM-WD051H8 EM-WD051H5 5 1 17,000

Electro EZ-Mate Models

Downflow 18” Downflow 15” kW Stages Btu/h
EM-LD104L8* EM-LD104L5* 10 4
34,000
EM-LD104Z8 EM-LD104Z5 10 4
34,000

*With load shed CT

Electro-Mate® HeatChoice II™ Models

Downflow 18” Downflow 15” kW Staging Btu/h
EM-ED204C8 EM-ED204C5 20 4 x 5 kW 68,000
EM-ED153C8 EM-ED153C5 15 3 x 5 kW 51,000
EM-ED102C8 EM-ED102C5 10 2 x 5 kW 34,000

Other options

WarmFlo

  • Need more Btu/h-check out (up to 30 kW)
  • Multi-zone/damper system
  • Air flow concerns
  • Heat Pump system

Electro-Duct

  • No backup furnace-looking for straight electric

WarmFlo Electro-Duct

  • Ground Source heat pump systems
  • Air Source heat pump system-no backup furnace
     


Electro Industries, Inc., 2150 West River Street, PO Box 538, Monticello, MN 55362 (Map)
Phone: 800.922.4138 or 763.295.4138  Fax: 763.295.4434

Copyright 2016 Electro Industries, Inc. unless otherwise noted. All rights reserved.