|
 Over the past few years we have added a number of products geared around the commercial applications for forced air electric heat. Our products range from plenum heaters to duct heaters. Applications ranging from primary heat source to boost heaters that add heat to those cold areas. Heating capacity ranging from 1 kW to 30 kW.
Three-phase electric plenum heaters
Especially designed for commercial applications that require 3-phase 208V. Some applications may include:
- Churches
- Shops
- Manufacturing
- Offices
- Schools
Models for use in gas/oil furnace and electric
Similar in construction and functionality of the residential WarmFlo (spin-fin elements) our commercial three-phase plenum heaters come in two sizes. The models available are listed below.
Model # |
Description |
kW Rating |
Btu/h Rating |
EM-WU14358 |
WarmFlo/208V
3-phase |
14.4 |
50,000 |
EM-WU22378 |
WarmFlo/208V
3-phase |
22 |
75,000 |
Electric plenum heaters using our new WarmFlo technology can be configured up to 30 kW (102,420 Btu/h). To learn more about our WarmFlo Plenum heaters click here.
Capacities ranging from 1 kW to 20 kW, 240V single phase can be found in our residential information area. To learn more click here.
Models for use in Heat Pump or blower coil - no fossil fuel
For applications that are forced air and without a fossil fuel furnace, we have a number of electric duct heaters (open wire elements) that can be used.
Model # |
Description |
kW Rating |
Btu/h Rating |
EM-WM1134H |
WarmFlo/208V
3-phase |
10 |
34,140 |
EM-WM1536L |
WarmFlo/208V
3-phase |
15 |
51,210 |
For single phase applications ranging from 1 kW to 20 kW, single phase, 240V can be found in our residential information area. To learn more click here.
|
